您现在的位置:中国传动网  >  新闻首页  >  行业动态

邦纳A-GAGE® EZ-ARRAY™测量遮光板

2007年04月27日 17:37:00 中国传动网

邦纳工程公司推出的A-GAGE® ,EZ-ARRAY™两款高精度测量遮光板投入应用。经济有效的EZ-ARRAY表现为高速、精确的过程监视和检测、网络导向和成型功能。它提供快捷和简便安装,使用接近的红外光束来探测大小仅为5mm目标, 光栅边缘分辨能率为2.5 mm。发射器和接收器可处理长度为10,5mm放射范围的光束,精确测量范围为4m。外形选项包括14个测量模块,3个扫描模块,2个不连续输出和1个连续输出模块。EZ-ARRAY发射器/接收器的价格低于1,010美元。 邦纳的测距传感仪产品经理Brad Johnson 说:“EZ-ARRAY提供混合的快捷、简便的安装方法,可处理强硬的感应事件,且价格低于比相关产品低50%。”“接收器被植入了控制器的功能,所以基础设备可以不用控制器、软件或是PC。” Johnson补充说到,“简易型软件包括高级配置,使用PC。” 应用: EZ-ARRAY型测量遮光板是应用的理想选择,如在飞行中的产品定型和测量、边缘导向和中心导向、环形牵力控制、孔探测和部分计算功能。广泛适用于包装、导向操作、堆放、汽车和金属冲压工业。举例如下: • 焊缝清理机检测和长度确认 • 按大小排序的轮胎和不成形轮胎的探测 • 通过决定原木直径实现轮胎剥皮检查。 • 运输用的纸箱测量和体积测量的收集 original text [COLOR=#708090]A-GAGE® EZ-ARRAY™ Measuring Light Screen Delivers High-Accuracy Monitoring and Inspection EZ-ARRAY® Measuring Light Screens Minneapolis, MN—April 20, 2007—Banner Engineering Corp. introduces the A-GAGE® EZ-ARRAY™ two-piece measuring light screens for high-accuracy sensing in tough applications. The cost-effective EZ-ARRAY excels at high-speed, precise process monitoring and inspection, profiling and web-guiding applications. It offers quick and simple installation, and uses closely spaced infrared beams to detect objects as small as 5 mm; edge resolution is 2.5 mm. Emitter and receivers are available in 10 lengths with 5 mm beam spacing for precise measuring at ranges to 4 m. Configuration options include 14 measurement modes, three scanning methods, two analog and two discrete outputs and a serial output. EZ-ARRAY emitter/receiver pairs are priced as low as $1,010. "The EZ-ARRAY offers quick and simple installation with the sophistication to handle the toughest sensing applications and is priced 50% less than comparable alternatives,” said Brad Johnson, Banner’s measurement sensors product manager. “Controller functionality is built into the receiver, so basic setup requires no controller, software, or PC.” Johnson adds, “Easy-to-use software is included for advanced configuration, using a PC.” Applications. EZ-ARRAY measuring light screens are ideal for applications such as on-the-fly product sizing and profiling, edge-guiding and center-guiding, loop tensioning control, hole detection and parts counting. It is suited for a wide variety of uses in the packaging, printing, lumber, automotive and metal stamping industries. Examples include the following: • Lumber trimming inspection and length verification • Tire sorting by size and detection of deformed tires • Lumber debarking inspection by determining log diameters • Carton measurement and collection of cubing information for shipping [/COLOR]
声明:本文为中国传动网独家稿件。未经许可,请勿转载。

供稿:中国传动网 翻译

本文链接:http://www.chuandong.com/news/news.aspx?id=5638

中国传动网

官方微信

扫一扫,信息随手掌控

运动与控制

官方微信

扫一扫,运动与控制信息随手掌控

相关新闻

联系我们

广告联系:0755-82048561
展会合作:0755-83736589
杂志投稿:0755-82048562

网站简介|会员服务|联系方式|帮助信息|版权信息|法律声明|网站地图|友情链接|法律支持|意见反馈

版权所有 2006-2016 中国传动网(ChuanDong.com)

  • 经营许可证
    粤B2-20150019

  • 粤ICP备
    14004826号

  • 不良信息
    举报中心

  • 网络110
    报警服务

网站客服热线

0755-82949541

QQ客服

2737591964